Avenue University / / Speaker Power
Enquire Now
Speaker Power — Professional Power, Pure Performance. Amplifier lineup.
Distributed & Taught · Avenue Sound India

Superior amplification, executed.

Dual-monoblock subwoofer amplifiers designed and assembled in Irvine, California — built to stay stable at 1 ohm and deliver real, sustained power where home theater bass actually lives.

Speaker Power SP2-12000-HT dual-monoblock rack amplifier
SP2-12000-HT · per channelClass-D / Dual Monoblock
1800W
8Ω
3200W
4Ω
6000W
2Ω
STABLE
1Ω
131 VRMS (185 Vp) at Hi-Z Full-bridge · no current pumping
Irvine, CA
DESIGNED & ASSEMBLED IN THE USA
3 Years
PARTS & LABOR WARRANTY
5Hz–500Hz
FREQUENCY RESPONSE, ±1.5dB
1Ω Stable
SUSTAINED, NOT JUST PEAK
Why we distribute it

Power that's rated for what it actually has to do

Most amplifier spec sheets quote a peak number and hope nobody asks about sustained output into a real subwoofer load. Speaker Power's line is built around the opposite idea.

Speaker Power builds a curated range of off-the-shelf plate and rack amplifiers, alongside custom OEM builds — from PCB and firmware through to fit and finish — for manufacturers and integrators who need a specific solution rather than a generic one.

Every unit ships from Irvine backed by a three-year parts-and-labor warranty, with the same team still supporting amplifiers built more than two decades ago. For Avenue Sound, that durability matters as much as the wattage on the box — a subwoofer amp is the one component in a home theater a client should never have to think about again.

Full-bridge output topology eliminates current pumping at high power, and the dual-monoblock architecture on the rack series keeps each channel's performance independent and consistent — which is exactly what our calibration training teaches integrators to measure for.

01

Curated + Custom

Off-the-shelf plate and rack amplifiers, or a fully custom OEM build tailored to a manufacturer's spec.

02

Full-bridge, dual-monoblock

Consistent high-power output per channel, without the current pumping that limits cheaper Class-D designs.

03

Built to be serviced, not replaced

Three-year warranty and long-tail support — the same philosophy Avenue Sound applies to every install we stand behind.

The lineup

Plate, rack, and standalone — one job each

Three formats built around the same Class-D topology and DSP control set, sized for where the amplifier needs to live: inside an enclosure, in a rack, or on its own.

Speaker Power dual-monoblock rack amplifier — DSP control detail
Plate Amplifiers
Rack Amplifiers
Standalone
Home Theatre Series

SP1-HT Series · Monoblock Plate Amplifiers

Purpose-built to mount directly into a subwoofer enclosure — from a compact 300W module to the 6000W flagship.

FLAGSHIP
SP1-6000-HT plate amplifier

SP1-6000-HT

MONOBLOCK · HOME THEATER
  • 2Ω6000W
  • 4Ω3400W
  • 8Ω1800W
  • Response5Hz–500Hz
$1,749 · stable at 1Ω
SP1-4000-HT plate amplifier

SP1-4000-HT

MONOBLOCK · HOME THEATER
  • 2Ω / 4Ω4000W class
  • DSPLF, X-over, delay
$1,499
SP1-3200-HT plate amplifier

SP1-3200-HT

MONOBLOCK · HOME THEATER
  • Power class3200W
  • DSPLF, X-over, delay
$1,649
SP1-2400-HT plate amplifier

SP1-2400-HT

MONOBLOCK · HOME THEATER
  • Power class2400W
  • DSPLF, X-over, delay
$1,399
SP1-700-HT plate amplifier

SP1-700-HT

MONOBLOCK · HOME THEATER
  • Power class700W
  • DSPLF, X-over, delay
$499
SP1-300-HT plate amplifier

SP1-300-HT

MONOBLOCK · ENTRY
  • Power class300W
  • DSPLF, X-over, delay
$399

SP2-HT Series · Dual-Monoblock Rack Amplifiers

19", 2RU rack-mount chassis housing two fully independent monoblock channels — each with its own DSP control set. Built for multi-sub and commercial installs.

FLAGSHIP
SP2-12000-HT rack amplifier

SP2-12000-HT

DUAL MONOBLOCK · 19" / 2RU
  • 2Ω (per ch.)6000W
  • 4Ω (per ch.)3200W
  • 8Ω (per ch.)1800W
  • Response5Hz–500Hz
$3,399 · stable at 1Ω per channel
SP2-8000-HT rack amplifier

SP2-8000-HT

DUAL MONOBLOCK · 19" / 2RU
  • Power class8000W
  • DSPIndependent per channel
$2,999
SP2-6400-HT rack amplifier

SP2-6400-HT

DUAL MONOBLOCK · 19" / 2RU
  • Power class6400W
  • DSPIndependent per channel
$3,299
SP2-4800-HT rack amplifier

SP2-4800-HT

DUAL MONOBLOCK · 19" / 2RU
  • Power class4800W
  • DSPIndependent per channel
$2,699
SP2-2400-HT rack amplifier

SP2-2400-HT

DUAL MONOBLOCK · 19" / 2RU
  • Power class2400W
  • DSPIndependent per channel
$2,199
SP2-1400-HT rack amplifier

SP2-1400-HT

DUAL MONOBLOCK · 19" / 2RU
  • Power class1400W
  • DSPIndependent per channel
$1,399

HTB-700 · Standalone Subwoofer Amplifier

A self-contained monoblock unit for installs where a plate amp isn't practical and a full rack is overkill — available in black or silver.

HTB-700 standalone subwoofer amplifier

HTB-700

MONOBLOCK · STANDALONE · BLACK / SILVER
  • 2.7Ω1000W
  • 4Ω700W
  • 8Ω350W
  • Response5Hz–500Hz
$549 · stable at 2Ω

Fits where rack space doesn't exist

Same 3-mode trigger, full DSP control set (gain, LF adjust, crossover, delay) and full-bridge output as the rest of the range — in a compact chassis that sits alongside the sub instead of inside it.

HTRx Series · Multi-Channel Class D Amplifiers

ICEpower-based Class D amplification across 4- and 8-channel fanless platforms — engineered for full, sustained output at bass frequencies rather than short-burst headline numbers.

Exclusively distributed in India by Avenue Sound
8-Channel Platform
SpeakerPower HTRx8-200 8-channel amplifier

HTRx8-200

8-CHANNEL · ICEPOWER · FANLESS
  • 4Ω / ch200W
  • 8Ω / ch100W
  • Total PSU1200W
  • Response3Hz–50kHz
S/N 110dB · 24dB gain/ch
FLAGSHIP
SpeakerPower HTRx8-400 8-channel amplifier

HTRx8-400

8-CHANNEL · ICEPOWER · FANLESS
  • 4Ω / ch400W
  • 8Ω / ch200W
  • Total PSU2000W
  • Response3Hz–70kHz
S/N 121.5dB · 29.4dB gain/ch
4-Channel Platform
SpeakerPower HTRx4-channel amplifier

HTRx4-200

4-CHANNEL · ICEPOWER · FANLESS
  • 4Ω / ch200W
  • 8Ω / ch100W
  • Total PSU600W
S/N 110dB
SpeakerPower HTRx4-channel amplifier

HTRx4-400

4-CHANNEL · ICEPOWER · FANLESS
  • 4Ω / ch400W
  • 8Ω / ch200W
  • Total PSU1000W
S/N 121.5dB
SpeakerPower HTRx4-channel amplifier

HTRx4-700

4-CHANNEL · ICEPOWER · FANLESS
  • 4Ω / ch750W
  • 8Ω / ch370W
  • Total PSU2000W
30 Ap peak current
SpeakerPower HTRx4-channel amplifier

HTRx4-800

4-CHANNEL · ICEPOWER · FANLESS
  • 4Ω / ch500W
  • 8Ω / ch800W
  • Total PSU2000W
Response to 80kHz
SpeakerPower HTRx4-channel amplifier

HTRx4-1200

4-CHANNEL · ICEPOWER · FANLESS
  • 4Ω / ch1250W
  • 8Ω / ch620W
  • Total PSU3100W
38 Ap peak current
FLAGSHIP
SpeakerPower HTRx4-channel amplifier

HTRx4-2000

4-CHANNEL · ICEPOWER · FANLESS
  • 4Ω / ch2000W
  • 8Ω / ch1400W
  • Total PSU4000W
38 Ap · multi-sub arrays
Every HTRx model ships with RCA + XLR inputs, 5-way binding posts, 12V trigger in/through, and a front-panel LED that can be switched off for dedicated theatre rooms. Product photography courtesy of shop.avenuesound.in; the 4-channel platform shares imagery with the 8-channel chassis until Avenue Sound publishes model-specific shots.
The engineering, in plain terms

Reaching down to 5Hz — and staying there under load

Every amplifier in the range is voiced for the same job: reproducing the deep, sustained bass that synthesized effects and cinematic low end actually demand, without losing control as impedance drops.

Every channel carries the same set of rotary DSP controls, so calibration transfers directly from one model to the next.

GAIN
0dB → Mute
LF ADJUST
±12dB @ 40Hz
CROSSOVER
60Hz → Out
DELAY
0–20ms
Frequency response · all models
5Hz 500Hz ±1.5dB
Sub-bass / LFE Upper bass crossover
Beyond the catalog

Two more ways Speaker Power ships

Not every project fits a shelf part number. Speaker Power supports both ends of that spectrum.

◧

OEM & Custom Solutions

Off-the-shelf as-is, or fully custom — from PCB and firmware through to final fit and finish — engineered to a manufacturer's exact spec, with short lead times and small minimum order quantities.

Talk to Avenue Sound about a custom build →
◨

Installer & Commercial

Modular, scalable amplifier architecture for installations of any size — from a single custom-home theater to full-venue commercial builds — engineered to be specified once and deployed repeatedly.

Discuss a commercial install →
Trained on, at Avenue University

Bass management is where calibration gets real

Speaker Power's DSP set — gain, LF adjust, crossover, and delay — is exactly what integrators put into practice during bass management training. Understanding how a sustained 1Ω-stable amplifier behaves under real load is core to getting a subwoofer to disappear into a room instead of dominating it.

These amplifiers show up directly inside our hands-on calibration cohorts, alongside REW and miniDSP.

AC-101 Audio Calibration Training — bass management module MZ-210 Multizone Audio with Dante — multi-sub amplifier integration FN-100 Do Cables & Power Really Matter? — power delivery seminar
Hear it in a showroom

Feel the difference at full power

Speaker Power amplifiers are demoed at both Avenue Sound showrooms. Bring your toughest low-frequency scene — that's the one worth hearing on this gear.

BengaluruDevanahalli showroom
Navi MumbaiSeawoods showroom